Phoenix, Arizona
Custom Conference Tables in Phoenix, AZ
Downtown, Midtown and Camelback corridor offices. We design, build and install custom executive boardroom tables for Phoenix offices and private studies: sized to the room, matched to the finishes, and cut for the power and data the space needs.
- Downtown and Midtown high-rise floors
- Camelback Corridor and Biltmore offices
- Arcadia and Biltmore-area private residences
- Sky Harbor-adjacent corporate headquarters
Phoenix Projects
What a Phoenix Boardroom Asks For
Phoenix boardrooms are usually on a leased high-rise floor with a glass curtain wall on one side and a finished millwork wall on the other. That combination sets the terms for a table: the top has to hold up under direct west light without going chalky, and the base has to sit correctly against a floor box grid you did not get to choose.
We measure the room, confirm elevator and door access for the top, and lay the slab out so the strongest veining runs where people sit and where the camera sees it. On Camelback Corridor and Arcadia projects we are just as often working on a private study or home office table as a corporate boardroom.
Where the work is
- Downtown and Midtown high-rise floors
- Camelback Corridor and Biltmore offices
- Arcadia and Biltmore-area private residences
- Sky Harbor-adjacent corporate headquarters
Shop and office: 7720 E. Gelding Dr., Ste. 100, Scottsdale, AZ 85260
Mon – Fri: 8:00AM – 5:00PM
sales@azboardrooms.comDesign Considerations
Details We Resolve Before Anything Gets Cut in Phoenix
The difference between a table that belongs in the room and one that was simply delivered to it comes down to decisions made early. These are the ones that matter most on Phoenix projects.
High-rise access
Freight elevator dimensions, corridor turns and door widths get confirmed before we cut. Long tops ship in sections and get assembled and seamed on the floor.
Glass and daylight
Stone and wood finishes are selected knowing how much direct light the room takes. Honed and leathered surfaces hold up better than high polish under a west wall.
Existing floor boxes
In leased space the power is where the power is. Base locations and device cores are drawn to the boxes that already exist.
Materials
Material Direction for Phoenix Rooms
Stone, wood and steel get combined in one table. Slabs and species are selected for your specific room, then laid out so the veining and grain land where they should.
Stone
Granite, marble and quartzite tops
The top is stone. Slabs are selected for the project, then laid out so the veining lands where it should on the surface and carries through any mitered edge. Finish, thickness and edge profile are chosen per table, and the layout is confirmed before a saw touches the slab.
Wood
Walnut and white oak bases
Wood does the work below the surface. Solid walnut and white oak bases, pedestals and panels, fluted or flat, stained and sheened to sit with the millwork already in the room rather than compete with it.
Steel & Detail
Structure, reveals and trim
Steel carries long spans inside the substructure where nobody sees it, then shows up deliberately as reveals, trim and base detail. Metal finishes and Schluter profiles are matched to the hardware and metals already specified.
Designs
Table Concepts for Phoenix Boardrooms
Three starting points, each developed around your specific room. None of them are fixed catalog sizes.
Monolith
All stone, top and base
Stone top and stone base, squared edges, built as one mass.
Waterfall
Mitered edge, continuous veining
Mitered edge carries the slab veining down the side to the floor.
Presidential
Long format, built in sections
Long-format table for large boardrooms and executive suites.
Full Custom
Start from the room, not from a direction
No starting shape. Built from your drawings, room and detail list.
Who We Work With
People We Build For in Phoenix
Some clients come to us directly because their boardroom no longer matches the rest of the company. Others come through the designer, architect or builder already running the project.
Either way the work is the same: understand the room, resolve the details, and deliver a table that installs on the date it is supposed to.
- Executive teams and firm partners
- Interior designers and architects on tenant improvements
- General contractors running office buildouts
- Homeowners finishing a private study or home office
Process
How a Phoenix Project Runs
Four steps from your plans to a finished table set in the room, with an approval point before anything is fabricated.
- 01
Design
We start from your plans, dimensions, seat count and design intent. Clearances, base locations and material direction get resolved on paper first.
- 02
Rendering
You see the table rendered before fabrication starts, so the shape, slab layout and proportions are approved by the people signing off.
- 03
Fabrication
Built in Arizona. Slabs are laid out and cut, the substructure is fabricated, and device cores are cut for the specified power and data.
- 04
Installation
Delivered and assembled on site, sectioned when access requires it, and set over the floor boxes it was designed around.
FAQ
Phoenix Questions
- Can You Install On A High Floor Downtown?
- Yes. We plan the install around freight elevator access and building loading hours, and we section long tops when the path in requires it.
- How Long Does A Phoenix Project Take?
- Design and rendering approval usually runs a few weeks, then fabrication and install are scheduled to your date. Long stone tables need the most lead time, so tell us the install date early.
The Cashwood Companies
Where the Experience Comes From
Cashwood Innovations works on high-end homes and projects through technology, AV and automation. CashScapes extends that work into architectural and landscape lighting. AZ Boardrooms brings the same coordination into custom executive conference and boardroom tables.
A client planning a boardroom table in Phoenix is often planning lighting and technology in the same building. Between the three companies, those details get coordinated by people who already work together.
Cashwood Innovations
Technology, AV and automation for high-end homes and projects.
Visit Cashwood InnovationsAZ Boardrooms
Custom executive conference and boardroom tables.
Current siteNearby
Other Arizona Service Areas
Start a Project
Planning a Boardroom in Phoenix?
Plans, dimensions, seat count, material direction and technology requirements are enough to start. A rough sketch works too.